Synthesis of Mg-stabilized nitrogen-rich alpha-sialons along Si3N4–0.5Mg3N2:3AlN line via field-assisted sintering
October 07, 2022
Bilal Anjum Ahmed, Tahar Laoui, Abbas Saeed Hakeem,
Journal of the American Ceramic Society - Pages 1-11
Performance Prediction of Erosive Wear of Steel for Two-Phase Flow in an Inverse U-Bend
August 12, 2022
Saifur Rahman, Muhammad Rehan Khan, Usama Muhammad Niazi, Stanislaw Legutko, Muhammad Ali Khan, Bilal Anjum , Jana Petru, Jiří Hajnyš, Muhammad Irfan,
Materials - Volume 15(16), Article Number 5558
Investigation of the Impact Resistance Behavior of Customized Hair Clipper Comb Fabricated by Fused Deposition Modeling
July 01, 2022
Uzair Ali, Hasan Aftab Saeed, Bilal Anjum, Sajid Ullah Butt, Muhammad Rehan Khan,
Sustainability - Volume 14(13), Article Number 8071
Multi-Objective Welding-Parameter Optimization Using Overlaid Contour Plots and the Butterfly Optimization Algorithm
June 27, 2022
Rehan Waheed, Hasan Aftab Saeed, Bilal Anjum,
Materials - Volume 15, Issue 13, Article Number 4507
Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas–Liquid–Solid Three Phase Flow
May 23, 2022
Muhammad Rehan Khan, Hamdan H. Ya, Imran Shah, Usama Muhammad Niazi , Bilal Anjum, Muhammad Irfan, Adam Glowacz, Zbigniew Pilch, Frantisek Brumercik, Mohammad Azeem, Mohammad Azad Alam, Tauseef Ahmed,
Materials - Volume 15(10), Article Number 3721
Development and Characterization of Silver-Doped Multi-Walled Carbon Nanotube Membranes for Water Purification Applications
February 02, 2022
Muhammad Umar Amjad, Bilal Anjum Ahmed, Faisal Ahmed, Hasan Aftab Saeed,
Membranes - Volume 12(2), Article Number 179
Effect of nano- and micro-sized Si3N4 powder on phase formation, microstructure and properties of β′-SiAlON prepared by spark plasma sintering
January 15, 2022
Abdulhakim Bake, Abbas Saeed, Bilal Anjum Ahmed, Anwar Ul-Hamid, Luai M. Alhems, M. Ali Ehsan, Mjed Hashem, M.T. Tanvir, Stuart Hampshire,
Ceramics International - Volume 48, Issue 2, Pages 1916-1925
Spark Plasma Sintering of SiAlON Ceramics Synthesized via Various Cations Charge Stabilizers and Their Effect on Thermal and Mechanical Characteristics
November 12, 2021
Muhammad Zulqarnain Falak, Bilal Anjum Ahmed, Hasan Aftab Saeed, Sajid Ullah Butt, Abbas Saeed Hakeem, Usman Ali Akbar,
Crystals - Volume 11(11), Pages 1378
Framework for Mitigation of Welding Induced Distortion through Response Surface Method and Reinforcement Learning
October 09, 2021
Rehan Waheed, Hasan Aftab Saeed, Sajid Ullah Butt, Bilal Anjum,
Coatings - Volume 11(10), Article Number 1227
Synthesis and characterization of alkaline earth and rare earth doped sialon Ceramics by spark plasma sintering
June 01, 2021
Abbas Saeed Hakeem, Majid Khan, Bilal Anjum Ahmed, Ahmed Al Ghanim, Faheemuddin, Muhammad Ali Ehsan, Sadaqat Ali, Tahar Laoui, Sharafat Ali,
International Journal of Refractory Metals and Hard Materials - Volume 97, Article Number 105500
Thermomechanical and tribological properties of spark plasma sintered bearing steel/cBN(Ni) composites for engineering applications
November 01, 2020
Akeem Yusuf Adesina, Akeem Yusuf Adesina, Abbas Saeed Hakeem, Abbas Saeed Hakeem, Muhammad Umar Azam, Muhammad Umar Azam, Bilal Anjum, Almigdad B. Ibrahim, Almigdad B. Ibrahim, Muhammad Ali Ehsan, Muhammad Ali Ehsan, Ahmad A. Sorour, Ahmad A. Sorour,
Journal of Materials Research and Technology - Volume 9, Issue 6, Pages 14645-14661
Development of calcium stabilized nitrogen rich α-sialon ceramics along the Si3N4:1/2Ca3N2:3AlN line using spark plasma sintering
October 10, 2020
Bilal Anjum, Tahar Laoui, Abbas Saeed Hakeem,
Journal of Advanced Ceramics - Volume 9(5), Pages 606–616
Evaluation of alumina reinforced oil fly ash composites prepared by spark plasma sintering
February 09, 2020
Sadaqat Ali, Bilal Anjum Ahmed, Hafiz Muzammil Irshad, Akolade Idris Bakare, Abbas Saeed Hakeem, Muhammad Qamaruddin, Sameer Ali, M. Umar Azam,
International Journal of Applied Ceramic Technology - Pages 1-11
The Property Characterization of α-Sialon/Ni Composites Synthesized by Spark Plasma Sintering
November 25, 2019
Adedayo Sheriff Adeniyi, Bilal Anjum Ahmed, Abbas Saeed Hakeem , Faheemuddin Patel , Akolade Idris Bakare , Anwar Ul-Hamid , Anwar Ul-Hamid , Amir Azam Khan , Amir Azam Khan , Muhammad Ali Ehsan , Muhammad Ali Ehsan , Tahir Irfan Khan, Tahir Irfan Khan,
Nanomaterials - Volume 9, Issue 12, Article Number 682
Tribological behaviour of alumina-based nanocomposites reinforced with uncoated and Ni-coated cubic boron nitride
August 23, 2019
M.Umar Azam, Bilal Anjum Ahmed, Abbas Saeed Hakeem, Hafiz Muzammil Irshad, Tahar Laoui, Muhammad Ali Ehsan, Faheemuddin Patel, Fazal Ahmad Khalid,
Journal of Materials Research and Technology - -
Effect of nano-size oxy-nitride starting precursors on spark plasma sintering of calcium sialons along the alpha/(alpha+beta) phase boundary
May 01, 2019
Bilal Anjum Ahmed, Abbas Saeed Hakeem, Tahar Laoui,
Ceramics International - CERAMICS INTERNATIONAL Volume: 45 Issue: 7 Pages: 9638-9645 Part: B
Joule Heating in Two-dimensional Materials Based Transistors
April 09, 2019
Faisal Ahmed, Bilal Anjum Ahmed, Abbas Saeed Hakeem,
Research & Development in Material Science - Volume 10, Issue 4
Effect of Ni content and Al2O3 particle size on the thermal and mechanical properties of Al2O3/Ni composites prepared by spark plasma sintering
November 01, 2018
Hafiz Muzammil Irshad, Abbas Saeed Hakeem, Bilal Anjum Ahmed, sharafat ali, Sadaqat Ali, Sameer Ali, Muhammad Ali Ehsan, Tahar Laoui,
International Journal of Refractory Metals and Hard Materials - Volume: 76, Pages: 25-32
Synthesis of hard and tough calcium stabilized α-sialon/SiC ceramic composites using nano-sized precursors and spark plasma sintering
August 15, 2018
Raja Muhammad Awais, Bilal Anjum Ahmed, Moath, Abbas Saeed, Tahar Laoui,
Journal of Alloys and Compounds - JOURNAL OF ALLOYS AND COMPOUNDS Volume: 757 Pages: 200-208
Low-temperature spark plasma sintering of calcium stabilized alpha sialon using nano-size aluminum nitride precursor
February 01, 2018
Bilal Anjum Ahmed, Abbas Saeed Hakeem, Tahar Laoui, Moath Al-Malki, Muhammad Ali Ehsan, S.Ali,
International Journal of Refractory Metals and Hard Materials - Volume: 71, Pages: 301-306
Effect of precursor size on the structure and mechanical properties of calcium-stabilized sialon/cubic boron nitride nanocomposites
December 25, 2017
Bilal Anjum Ahmed, Abbas Saeed Hakeem, Tahar Laoui, Raja Muhammad Awais, Moath Mohammad Al Malki, Anwar Ul-Hamid, Fazal Ahmad Khalid, Nabi Bakhsh,
Journal of Alloys and Compounds - Volume 728, Pages 836-843, 25 December 2017
Investigation of the structural and mechanical properties of micro-/nano-sized Al2O3 and cBN composites prepared by spark plasma sintering
October 01, 2017
Hafiz Muzammil Irshad, Bilal Anjum Ahmed, Muhammad Ali Ehsan, Tahir Irfan Khan, Tahar Laoui, Muhammad Rizwan Yousaf, Ahmed Ibrahim, Abbas Saeed Hakeem,
Ceramics International - CERAMICS INTERNATIONAL Volume: 43 Issue: 14 Pages: 10645-10653
Comparative study of Polyamide 6 reinforced with glass fiber and montmorillonite
May 01, 2015
Ahmad Nawaz Khan, Bilal Anjum Ahmed,
Polymer Bulletin - Volume 72, Issue 5, Pages 1207-1216
Synthesis of Laser Beam Rapidly Solidified Novel Surfaces on D2 Tool Steel
May 14, 2012
B.A. Ahmed, K.F. Rizwan, Jafar A. Minhas, Syed Waheed-ul-Haq, M. Shahid,
Key Engineering Materials - Volumes 510-511, Pages 493-499