Muhammad Rehan Khan
Associate Professor
- College of Electrical & Mechanical Engineering
- 5154444316
Summary
Academic Background
PhD
(Erosion-Corrosion) Universiti Teknologi Petronas
September 18, 2017 - September 15, 2020
Honours and Awards
Publications
Erosive wear assessment of low-carbon steel horizontal 180-degree elbow pipe in two-phase and three-phase flow
June 15, 2026
POWDER TECHNOLOGY - Volume: 477, Article Number: 122458,
Mapping of geometrical features of an axisymmetric object: Impact of laser scanning parameters and surface topography
June 01, 2026
Precision Engineering - Volume 100, Pages 221-236
Failure analysis of a centrifugal pump impeller in erosive f low conditions
April 01, 2026
Engineering Failure Analysis - Volume:187, Article Number 110584
Numerical Investigation of Transonic Axial Compressor Rotor With Leading-Edge Tubercles
March 15, 2026
Engineering Reports - Volume 8, Issue 3, Article Number e70633
Erosive Wear Mitigation Using 3D-Printed Twisted Tape Insert Under Liquid–Solid Flow
January 23, 2026
Materials - Volume 19(3), Article Number 453
Optimization of Nano-Enhanced PCM with Plate-Fin Configuration for Thermal Management of Cylindrical Lithium-Ion Battery
December 31, 2025
International Journal of Heat and Technology - Volume 43, No. 6, Pages 2373-2390
Numerical investigation of forced convective heat transfer performance of slotted and twisted I-shaped pin fin heat sink
December 01, 2025
Case Studies in Thermal Engineering - Volume 76, Article Number 107352
Experimental and Numerical Evaluation of Residual Stresses Caused by Welding the Nozzle to the Header
August 30, 2025
Technical Gazette - Volume:32 No. 5, Page:1868-1875
Residual Stress in Friction Stir Welding of Dissimilar Aluminum Alloys: A Parametric Study
January 12, 2025
Materials - Volume: 18, Issue: 2, Article Number: 316, Pages:15
Failure Analysis of Additively Manufactured PLA with Different Morphological Arrangements in Erosive Flow
December 01, 2024
Journal of Materials Research and Technology - Volume 33, Pages 5838-5849
Abrasive water-jet machining: current research aspects
October 21, 2024
Empirical and Analytical Modelling - Volume 21, Chapter 3, Pages 35-57
Influence of pH value on erosive wear of 3D-printed polylactic acid for multiphase flow
September 10, 2024
Materials Research Express - Volume 11, Number 9, Article Number 095303
Regression-based prediction of flow-induced dominant vibrational frequencies in two-phase flow regimes
September 01, 2024
Ocean Engineering - Volume 307, Article Number 118178
Reliability Assessment of Gored Elbow in Erosive Two-Phase Flow with Sand Particles
June 29, 2024
Eksploatacja i Niezawodnosc-Maintenance and Reliability - Volume 26(3), Article Number 190362
Erosion-corrosion failure analysis of the elbow pipe of steam distribution manifold
June 01, 2024
Engineering Failure Analysis - Volume: 160, Article Number: 108177
Experimental Verification of Geometric Changes Caused by the Release of Residual Stresses for Large-Scale Welded Frames
May 16, 2024
Materials - Vol: 17, Issue: 10, Article Number:2389
Effect of the shape of flapping airfoils on aerodynamic forces
April 30, 2024
Heliyon - Volume 10, Issue 8, Article Number e29561
Experimental and numerical study of erosive wear of t-pipes in multiphase flow
April 03, 2024
Engineering Science and Technology, an International Journal - Volume 52, April 2024, 101683
On-Machine Measurement as a Factor Affecting the Sustainability of the Machining Process
March 02, 2024
Sustainability - Vol:16(5), Article Number: 2093
Evaluation of erosion of AISI 1045 carbon steel due to non-cohesive microparticles
February 01, 2024
Journal of Materials Research and Technology - Volume 28, Pages 1423-1432
Experimental and numerical investigation of hydro-abrasive erosion in the Pelton turbine buckets for multiphase flow
February 01, 2024
Renewable Energy - Volume 222, Article Number 119829
Two-phase flow regime identification using multi-method feature extraction and explainable kernel Fisher discriminant analysis
December 25, 2023
International Journal of Numerical Methods for Heat & Fluid Flow - Pages 1-29
Erosion prediction due to micron-sized particles in the multiphase flow of T and Y pipes of oil and gas fields
December 01, 2023
International Journal of Pressure Vessels and Piping - Volume 206, Article Number 105041
Erosion–Corrosion Failure Analysis of a Mild Steel Nozzle Pipe in Water–Sand Flow
November 08, 2023
Materials - Volume 16, Issue 22 , Article Number 7084
Tribological and morphological properties of bentonite nano-clay/CaCO3 reinforced high-density polyethylene nanocomposites
November 07, 2023
Polymer Composites - Pages 1-17
Parametric Analysis of Tool Wear, Surface Roughness and Energy Consumption During Turning of Inconel 718 under dry, wet and MQL conditions
November 03, 2023
Machines - Volume 11, Issue 11 Article Number 1008
Erosion impact on mild steel elbow pipeline for different orientations under liquid-gas-sand annular flow
November 01, 2023
Engineering Failure Analysis - Volume 153, Article Number 107565
Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing
September 26, 2023
International Journal of Computational Methods and Experimental Measurements - Volume 11, No. 3, Pages 157-161
Investigation of Natural/Synthetic Hybrid Composite for Marine Application
July 08, 2023
Book on Green Hybrid Composite in Engineering and Non-Engineering Applications - Chapter 12, Pages 197-210
Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach
November 22, 2022
Materials - Volume 15, Issue 23, Article Number 8296
A Comprehensive Review on Investigation of Sediment Erosion of Pelton Wheel Turbine
September 13, 2022
Pakistan Journal of Engineering and Technology - Volume 5, Number 2, Pages 152-162
Numerical Simulation of Viscosity Effects on Carbon Steel 90° Elbow Erosion due to Sand-Liquid Flow
August 19, 2022
Defect and Diffusion Forum - Defect and Diffusion Forum
Performance Prediction of Erosive Wear of Steel for Two-Phase Flow in an Inverse U-Bend
August 12, 2022
Materials - Volume 15(16), Article Number 5558
Investigation of the Impact Resistance Behavior of Customized Hair Clipper Comb Fabricated by Fused Deposition Modeling
July 01, 2022
Sustainability - Volume 14(13), Article Number 8071
Evaluation of Ultrasonically ZnO Loading Effect on Photocatalytic Self-Cleaning, UV Protection and Antibacterial Activity of Plasma/Citric Acid-Activated Cotton Fabric
June 20, 2022
Nanomaterials - Volume 12(12), Article Number 2122
Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas–Liquid–Solid Three Phase Flow
May 23, 2022
Materials - Volume 15(10), Article Number 3721
Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review
May 01, 2022
Journal of Energy Storage - Volume 49, Article Number 103468
Working of Functional Components in Self healing Coatings for Anti-corrosion Green Tribological Applications An Overview
October 04, 2021
Book on Green Tribology: Emerging Technologies and Applications - 1st Edition, Chapter 6, Pages 159-176
Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study
December 01, 2020
Journal of Materials Research and Technology - Volume 9, Issue 6, Pages 14036-14050
Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90◦ elbow pipe in slug flow
October 16, 2020
Materials - Volume 13, Issue 20, Article Number
Pseudo-ductility, morphology and fractography resulting from the synergistic effect of CaCO3 and bentonite in HDPE polymer nano composite
July 27, 2020
Materials - Volume 13, Issue 15, Article Number 3333
Influence of sand fines transport velocity on erosion-corrosion phenomena of carbon steel 90-degree elbow
May 11, 2020
Metals - Volume 10, Issue 5, Article Number 626
Erosion–Corrosion of 30°, 60°, and 90° Carbon Steel Elbows in a Multiphase Flow Containing Sand Particles
November 26, 2019
Materials - Volume 12(23), Article Number 3898
An experimental study on the erosion-corrosion performance of AISI 1018 carbon steel and AISI 304L stainless steel 90-degree elbow pipe
November 25, 2019
Metals - Volume 9, Issue 12, Article Number 1260
Numerical investigation of the influence of sand particle concentration on long radius elbow erosion for liquid-solid flow
October 01, 2019
International Journal of Engineering, Transactions A: Basics - Volume 32, Issue 10, Pages 1485-1490
Numerical Investigation of the Elbow Angle Effect on Solid Particle Erosion for Liquid-Solid Flow
February 01, 2019
International Journal of Mechanical and Mechatronics Engineering - Volume 19(1), Pages 1-13
Conferences
Prospects and Risks of Green Hydrogen Use in Transport - A Review
June 18, 2025 - June 20, 2025
Jacek Bogusławski, Michał Wieczorowski, Adam Lewandowski, Paweł Fuć, Muhammad Rehan Khan, Wojciech Prus,
Lecture Notes in Mechanical Engineering
Assessment of Impact Resistance Characteristics of 3D-Printed Polymers
April 25, 2025 - April 26, 2025
Muhammad Rehan Khan, Shamsher Ali, Muhammad Ibrahim Asim, Syed Aliyar Shah, Moiz Ahmad,
14th International Mechanical Engineering Conference (IMEC)
Numerical Investigation of Pressure Drop in Two-Phase Flow Return Bend for Slug Flow Regime
September 10, 2024 - September 11, 2024
Muhammad Sohail, William Pao, Abdul Rahim Othman, Huzaifa Azam, Umair Khan, Muhammad Rehan Khan,
International Conference on E-Mobility
Measurements of Geometric Quantities in an Automatic Line for the Verification of Large-Size Rings and Rims
June 26, 2024 - June 28, 2024
Michał Wieczorowski, Bartosz Gapinski, Michał Jakubowicz, Dawid Kucharski, Karol Grochalski, Natalia Swojak, Lidia Marciniak-Podsadna, Aleksandra Krawczyk, Rehan Khan, Alejandro Pereira, Maciej Zakrzewicz,
Iinternational Conference Innovation in Engineering
Influence of Selected Measurement Conditions on the Reliability of the Representation of Ring and Rim Features
May 14, 2024 - May 16, 2024
Michał Wieczorowski, Bartosz Gapinsk, Michał Jakubowicz, Dawid Kucharski, Karol Grochalski, Natalia Swojak, Lidia Marciniak-Podsadna, Maria Kuznowicz, Aleksandra Krawczyk, Jerzy A. Sładek, Muhammad Rehan Khan,
International Scientific-Technical Conference MANUFACTURING
Recent Trends in Artificial Intelligence and Machine Learning Methods Applied to Water Jet Machining
May 14, 2024 - May 16, 2024
Muhammad Rehan Khan, Michał Wieczorowski, Ariba Qureshi, Muhammad Ammar, Tauseef Ahmed, Umair Khan ,
International Scientific-Technical Conference MANUFACTURING
Evaluation on the impact behavior of stir-casted Aluminum composites reinforced with SiC and Gr for lightweight applications
September 12, 2023 - September 13, 2023
MOHAMMAD Azad Alam, Hamdan Haji Ya, Lovejeet Gerewal, Mohammad Azeem, Faisal Masood, Mohammad Yusuf, Tauseef Ahmed, Muhammad Rehan Khan, Imtiaz Ahmed Shozib,
7th International Conference on Mechanical Engineering Research 2023
Numerical Study of Gas-Sand Two-Phase Flow Erosion in a Standard 90◦ Elbow †
August 24, 2023 - August 24, 2023
Nauman Khan, Muhammad Rehan Khan, Sati Ullah, Tariq Talha, Muhammad Ali Khan, Zubair Sajid,
Third International Conference on Advances in Mechanical Engineering 2023 (ICAME-23), Islamabad, Pakistan,
Erosion of pipe bends for multiphase flow: An Overview
March 15, 2023 - March 16, 2023
Muhammad Abdullah, Muhammad Rehan Khan, Uzair Khaleeq uz Zaman, Bilal Anjum, Muhammad Ali Khan, Abdur Rehman Mazhar,
2023 6th International Conference on Energy Conservation and Efficiency (ICECE)
A Review of Recent Studies of Dynamometers for Cutting Force Measurement in Machining Processes
October 26, 2021 - October 27, 2021
Abdul Raheem, Rehan Khan, Abdur Rehman Mazhar, Hamdan H. Ya, Mohammad Azad Alam , Tauseef Ahmed, Mohammad Azeem,
2021 International Conference on Robotics and Automation in Industry
Growth of NGVs and Comparative Study of Cylinder Material for CNG Storage
July 14, 2020 - July 16, 2020
Mohammad Azeem, Hamdan Haji Ya, Mohammad Azad Alam, Md Rehan Sadique, Mazli B Mustapha, Ainul Akmar Bin Mokhtar, Tauseef Ahmed, Mohamed Thariq Hameed Sultan, Muhammad Rehan Khan,
7th International Conference on Production, Energy and Reliability
The Study of Pseudo-ductile Polymer Nano Composite Reinforced with Non-treated Inorganic Nanofillers
July 14, 2020 - July 16, 2020
Tauseef Ahmed, Hamdan Haji Ya, Mohd Amin A. Majid, Mian Imran, Muhammad Rehan Khan, M. Azeem, M. Azad Alam, H. U. Khalid, Aamir Mehmood,
7th International Conference on Production, Energy and Reliability, ICPER 2020
Influence of elbow orientation on solid particle erosion for multiphase flow
November 19, 2019 - November 20, 2019
Muhammad Rehan Khan, Hamdan Haji Ya, William Pao, Armaghan Khan, R. Zahoor, Tauseef Ahmed,
5th International Conference on Mechanical, Manufacturing and Plant Engineering
Experimental investigations on the surface hardness of synthesized polystyrene/zno nanocomposites
November 19, 2019 - November 20, 2019
MOHAMMAD Azad Alam, Hamdan Haji Ya, P. B. Hussain, Mohammad Azeem, S. M. Sapuan, Muhammad Rehan Khan, Tauseef Ahmed,
5th International Conference on Mechanical, Manufacturing and Plant Engineering
An overview: Mechanical and wear properties of hdpe polymer nanocomposites reinforced with treated/non-treated inorganic nanofillers
November 19, 2019 - November 20, 2019
Tauseef Ahmed, Hamdan Haji Ya, Shuhaimi Mahadzir, Muhammad Rehan Khan, MOHAMMAD Azad Alam,
5th International Conference on Mechanical, Manufacturing and Plant Engineering
Investigation of maximum erosion zone in the horizontal 90° elbow
November 19, 2019 - November 20, 2019
Muhammad Rehan Khan, Hamdan Haji Ya, William Pao, T. V. V. L. N. Rao, MOHAMMAD Azad Alam, Mohammad Azeem,
5th International Conference on Mechanical, Manufacturing and Plant Engineering
Numerical Investigation of Sand Particle Erosion in Long Radius Elbow for Multiphase Flow
November 14, 2018 - November 14, 2018
Muhammad Rehan Khan, Hamdan Haji Ya, William Pao, Mohd Amin A. Majid,
4th International Conference on Mechanical, Manufacturing and Plant Engineering
Simulation study on impact of fine sand particle to 90° steel elbow in pipe
August 13, 2018 - August 14, 2018
Hamdan Haji Ya, M. F. Othman, William Pao, Ngo Nguyet Tran, Muhammad Rehan Khan,
6th International Conference on Production, Energy and Reliability 2018
Experimental study on the impact of wet sand particle to the erosion of carbon steel and HDPE
April 29, 2018 - April 30, 2018
Hamdan Haji Ya, Arif Hafizzie, William Pao, Suhaimi Hassan, Muhammad Rehan Khan,
4th International Conference on Green Design and Manufacture 2018
Research Assistant
Universiti Teknologi PETRONAS
October 03, 2017 - September 16, 2020
Lecturer
University of Lahore
August 01, 2016 - February 01, 2021
Lab Engineer
Air University
November 11, 2013 - August 31, 2016